Hybrid adapters are used for mating 2 different style connectors or assemblies. These adapters have a female adapter end united to the back end of a different male connector which can be connected to an additional adapter or interface of the same type. This can change the assembly end without the need for additional cable, therefore reducing space. Our hybrid adapters conform to international standards, are quality tested, and are available in single mode and multimode and come in many different connector-type configurations.
Ferrule Diameter 2.5mm – 2.5mm
| SINGLE MODE PC & APC | MULTIMODE | CONFORMANCE | |
|---|---|---|---|
| Insertion Loss (Typ) | <0.25 dB, <0.3 dB (E2000) | <0.20 dB | IEC 61300-3-4 |
| Mating Durability | 500 | IEC 61300-2-2 | |
| Receptacle Retention Force | 2 N – 5.9 N | IEC 61754 | |
| Operating Temperature | -25 to +70 °C, 12 cycles | IEC 61300-2-22 | |
Ferrule Diameter 2.5mm – 1.25mm
| SINGLE MODE PC & APC | MULTIMODE | CONFORMANCE | |
|---|---|---|---|
| Insertion Loss (Typ) | <0.25 dB | <0.20 dB | IEC 61300-3-4 |
| Mating Durability | 500 | IEC 61300-2-2 | |
| Receptacle Retention Force | 2 N – 5.9 N (2.5mm), 1 N – 3 N (1.25mm) | IEC 61754 | |
| Operating Temperature | -25 to +70 °C, 12 cycles | IEC 61300-2-22 | |
| Male End | Female End | Male to Female | Mode | Zirconia Sleeve and Metal Housing | ||||||||
| FC | FC | FC | FC | MF | 09 | OS1/OS2 | Z1N | |||||
| FCA | FC APC | FCA | FC APC | 62 | OM1 | |||||||
| LC | LC | LC | LC | 50 | OM2 | |||||||
| LCA | LC APC | LCA | LC APC | OM3 | OM3 | |||||||
| SC | SC | SC | SC | |||||||||
| SCA | SC APC | SCA | SC APC | |||||||||
| ST | ST | ST | ST | |||||||||
| STA | ST APC | STA | ST APC | |||||||||
| E2 | E2000 | |||||||||||
| E2A | E2000 APC | |||||||||||
| SMA | SMA | |||||||||||
Male End and Female End must be different.
